Joined
·
73 Posts
As for me was not interesting to have an end can without E number due different laws here
I decide to built myself one just yesterday .
Took a cheap R1 breadbox on ebay
Cut out the bypass exup part
welded togheter carefully keeping in minf the flowing function of bypass area
That´s all .
Not losing anymore at low revs (as i have a 17 r1 engine on my black MT) , not that loud under 4000 rpm.
Also fueling is far to be ok , as i´m running a map for a normal link pipe now
Sure is not titanium , but for the first try was not in idea to trow that much money.
I decide to built myself one just yesterday .
Took a cheap R1 breadbox on ebay
Cut out the bypass exup part
welded togheter carefully keeping in minf the flowing function of bypass area
That´s all .
Not losing anymore at low revs (as i have a 17 r1 engine on my black MT) , not that loud under 4000 rpm.
Also fueling is far to be ok , as i´m running a map for a normal link pipe now
Sure is not titanium , but for the first try was not in idea to trow that much money.
