Engine Specifications - Yamaha FZ-10 Forum
 
LinkBack Thread Tools
post #1 of 3 (permalink) Old 05-25-2016, 02:03 PM Thread Starter
Member
 
Join Date: May 2016
Posts: 80
Engine Specifications

Just about all the engine specifications you need can be found here, starting with a short list for those that want the quick and important tidbits, followed by it explained in great detail. Here you'll be able to connect the dots to exactly how the low to mid-range torque and power is delivered, and more.


Engine Specs Short-List
  • Engine: Liquid-cooled, DOHC, 16-valves (4-valves/cyl), in-line four-cylinder
  • Displacement: 998cc
  • Bore And Stroke: 79 x 50.9 mm
  • Compression Ratio: 12:1
  • Maximum Torque: 11.3 kg-m (81.8 ft-lb) @ 9,000 rpm
  • Engine Management: YCC-T, D-Mode (3), Traction Control (3), Cruise Control
  • Fuel Delivery: 45 mm Mikuni throttle body fuel injection
  • Lubrication: Wet sump
  • Ignition/Starting: TCI / Electric
  • Transmission: 6-speed
  • Final Drive: "O"-ring chain


Engine Specifications In Detail:
Quote:
Ultra-lightweight, compact, 998 cc, DOHC, 16-valve (4-valves / cyl.), liquid-cooled, in-line four-cylinder engine with "crossplane" style crankshaft. The FZ-10 engine is EU-4 emissions compliant (European Union emission standards ... this is a very clean engine!)

The key components of this cutting edge engine design are the "crossplane" crankshaft and an uneven firing order. Both of these features are used on Yamaha's championship winning R1. The FZ-10's crossplane crankshaft locates the center two rods at a 90 degree plane from the outer cylinders. Instead of the crank pins aligned on the same plane (a straight line drawn through the center of the crankshaft), they align on 2 planes in the form of a cross... or "crossplane". Working in conjunction with the crossplane crank is an uneven firing order. This FZ-10 engine fires 1,3,2,4 cylinders and the firing intervals are uneven at 270 / 180/ 90 / 180 degrees. What all this means to the rider is the most linear torque possible with amazing throttle control.

4-valve cylinder head design.
  • compact pent roof combustion chambers with 12:1 compression ratio
  • combustion chamber shape is optimized for low to mid-range power delivery
  • lightweight 31 mm steel intake valves & 26.5 mm steel exhaust valves
  • 4-valve design optimizes breathing efficiency & enhances "real world" ride-ability

Special intake port shape provides maximum filling efficiency & excellent torque.
  • revised intake port shape (Vs. R1 & R1S) enhances low to mid-range torque & power

"Finger follower rocker arms".
  • reduces friction, allows greater valve lift & provides super accurate control of valve opening & closing at high rpms
  • sliding area of the rocker arms feature a DLC (diamond like coating) to reduce friction & wear

Valve adjustment intervals are every 42,000 kms.

Revised intake & exhaust cams.
  • intake & exhaust cam profiles & timing have been revised (Vs R1 & R1S) for increased low to mid-range torque & power

Closed deck aluminum cylinder with "liner-less" ceramic composite plated cylinder bores.
  • ceramic coating sprayed directly on the aluminum block, eliminating the liner & reducing weight
  • excellent heat dissipation for consistent power delivery
  • coating enhances the thin film of oil between the cylinder & piston, reducing friction & increasing power
  • closed deck design allows cylinders to be spaced more closely together, reducing engine width
  • cylinder is a stand-alone design (not integrated into the upper crank case)

Offset cylinder design.
  • offsets cylinder block relative to the crankshaft (to the exhaust side) to reduce frictional losses between the piston & cylinder wall during the power stroke for improved power output

Revised short skirt, forged aluminum pistons.
  • lightweight design means fast throttle response
  • piston top / crown has been revised (Vs. R1 & R1S) to optimize the new combustion chamber shape & revised compression ratio
  • special Defric coating on piston skirts & piston pins reduce friction
  • piston oil coolers spray oil at the underside of pistons & rods to reduce temperature

Revised crossplane crankshaft design.
  • revised crank webs (heavier ... for optimized inertial mass) for excellent "ride-ability / street-ability"
  • increased inertial mass (weight) improves starts (moving away from a stop) & low speed engine control

Fracture split, steel connecting rods feature a "nut less" design.
  • lower end "cap" of the rod is made from the same piece of material as the upper portion; the 2 pieces are "split" apart using a special process known as fracture splitting & then machined
  • fracture splitting ensures true big end roundness & greater precision in con rod dimensions for excellent durability despite the high horsepower loads

Single axis balancer shaft.
  • reduces engine vibration to a minimum for excellent rider comfort

Crankcases feature a "Tri-Axis" layout for the crank, main & drive axles.
  • creates a more compact & shorter engine front to back
  • shorter engine allows for optimum engine placement in the "sweet spot" of frame for desired weight distribution & great handling

Closed loop, Mikuni throttle body fuel injection system.
  • FZ-10 uses a single set of 4 injectors (Vs. R1 & R1S twin injector system... using 8 injectors)
  • 12-hole injectors with optimized spray pattern for excellent "ride-ability" & throttle control
  • "closed loop system" uses dual oxygen sensors to sniff spent exhaust gases & automatically adjusts the fuel / air ratio for reduced emissions
  • fuel injection benefits include instant throttle response, choke-free starting, steady idle during warm up & reduced emissions

Yamaha Chip Control Throttle (YCC-T)
  • YCC-T electronically controls throttle valves for outstanding throttle response & controllability
  • system features Throttle Position Sensor (TPS) and D.C. motor driven throttle valves
  • YCC-T system provides precise control of intake air volume for a smoother torque curve
  • ECU that controls YCC-T is capable of responding to changes at a speed of 1000th of a second

Compact 6-speed transmission.
  • features optimized gear ratios matched to engine output (same ratios as R1/R1S)
  • secondary (final) reduction ratio has been revised (Vs. R1/R1S)... 43/16

Compact, lightweight slipper (back limiter) clutch assembly with assist.
  • reduces rear wheel hop/chatter during aggressive down shifts & under hard braking
  • smoother corner entries
  • assist function reduces clutch lever effort by up to 20% (Vs. a non-assist clutch)

Large capacity 12 litre air box
  • viscous type, high flow air filter is used
  • large capacity design helps smooth transition from on throttle to off throttle & vice versa

Mid ship design 4 into 2 into 1 exhaust system
  • features stainless steel header pipes & stainless steel under engine exhaust chamber
  • lightweight titanium silencer / muffler
  • design maximizes power, centralizes mass & lowers the centre of gravity for fast, light, agile handling
  • dual 3-way honeycomb catalyzers reduce harmful exhaust emissions

Yamaha's EXUP System (Exhaust Ultimate Power Valve).
part of the mid ship exhaust system
utilizes butterfly valve that prevents the "blow back" phenomenon caused by "valve overlap"
EXUP system eliminates "flat spots" in the power band & reduces emissions too

High-efficiency, high capacity curved radiator.
  • curved rad provides more cooling surface area than a conventional flat rad
  • dual "ring-type" fans provides increased airflow (& cooling) versus a standard cooling fan
  • external water pump (located outside of crankcases) reduces engine width & simplifies maintenance

Air-cooled oil cooler with protective screen
  • located below main rad
  • maintains consistent lubricant temperatures for extended engine life

Wet sump lubrication system with deep design aluminum oil pan.
  • easy access drain plug & spin-on type oil filter for fast, easy oil changes

Maintenance-free transistor controlled ignition (TCI).
  • produces a strong spark for fast starts
  • provides precise ignition timing / mapping for optimum engine performance at all rpms

Direct ignition coils
  • ignition coils are integrated into the plug caps, significantly reducing weight & complexity

Last edited by YamiFZ; 05-25-2016 at 02:13 PM.
YamiFZ is offline  
post #2 of 3 (permalink) Old 11-20-2016, 03:30 AM
Senior Member
 
Join Date: Jun 2016
Posts: 172
One thing to note, although it might have been mentioned on the forum already, is we don't get titanium and magnesium components that the R1 did. So while it is taking from the R1 in many ways, it's not entirely an R1. But that's not to say this will disappoint.
yamimoto is offline  
post #3 of 3 (permalink) Old 11-21-2016, 12:02 PM
Member
 
Join Date: May 2016
Posts: 89
It may not have the titanium and magnesium components, but we're still getting the R1's 998cc, inline-four cylinder engine which is what matters.



Yam Bob is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha FZ-10 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
All Technical MT-10/FZ-10 Specifications YamiFZ FZ-10 & MT-10 General 0 05-13-2016 12:22 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome